Jeppesen Marine Workboat Navigator 1.3 Manuel d'utilisateur télécharger pdf (Page 35)

2 - Installation

Configuring for AIS Data

An Automatic Identification System (AIS) Transceiver transmits and receives AIS

NMEA sentences. Jeppesen Workboat Navigator interprets and displays AIS target

data, providing you with the ability to make safer navigation decisions in shorter

periods of time.

Jeppesen Workboat Navigator displays an on-screen mark for all AIS-compliant

boats within radio range, including each boat's velocity vector. Click on each boat's

icon to learn boat name, course and speed, classification, call sign, registration

number, MMSI Number, and other AIS information being transmitted by the boat.

Start Jeppesen Workboat Navigator.

Open System Menu | Tools/Settings | Options | Ports: Configure.

In the Input Ports column, place a check-mark next to the COM Port your AIS

device is connected to.

Click Configure This Input Port...

Select the AIS sentences only radio button.

Figure 2.26 - COM1 Input Configuration Window

Set the Port Speed (baud rate) to match the baud rate of your AIS device. Some

AIS model’s baud rate may vary, but 38400 is standard.

Click OK.

In the Output column, place a check-mark next to the COM Port your AIS device

is connected to.

NOTE:

Always select the same Input and Output COM ports for this device.

Click Apply.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 57 58

Pas de commentaire

Jeppesen Marine Workboat Navigator 1.3 Manuel d'utilisateur Page 35